What Are Normal Depth of Upper Kitchen Cabinets?

A normal depth of upper kitchen cabinets is approximately 36 inches deep, with the depth of the cabinet limited by the depth of the top of the cabinet. In terms of the natural alignment of your kitchen and the depth of your cabinets, a deep upper cabinet will also make it easier to access the drawers, if there are drawers in your cabinets.

However, it's not just the depth of the cabinets that will limit the dimensions of your cabinet height. The location of the depth of your cabinets will also be a factor.

For example, if you place your counter at the same level as the width of your cabinets, then the depth of your cabinets will be equal to the height of the widest part of your cabinets. If you place your counter at a lower level, then the depth of your cabinets will be less than the height of the widest part of your cabinets. If you place your counter higher, then the depth of your cabinets will be more than the height of the widest part of your cabinets.

It's possible to install deeper cabinets, but you'll have to decide whether the extra depth is worth the space required to accommodate them. The deepest cabinet of your set will almost certainly have to be accessed from underneath, so you'll have to account for that when determining the depth of your cabinets.

Keep in mind that improper installation of kitchen cabinets can lead to a less than optimal result, so be sure to check out the proper clearance levels before you begin your work. If you have to access your cabinets from below, you'll need to make sure that they're just large enough to allow you to reach all of the drawers.

If you have to access your cabinets from above, make sure that they're tall enough to allow you to reach the tops of the shelves. If you need to access the shelves, then you have to provide sufficient height to allow you to reach all of the drawers. When you're installing your cabinets, make sure you only use the proper materials.

This means using materials that are sturdy and durable. Anything that doesn't allow for easy removal is not a good choice. As a general rule, lumber that's at least four inches thick is a safe choice.

You'll want to select the right kind of wood based on the dimensions of your cabinets. If you're remodeling your existing cabinets, you should take a look at your existing cabinets to find out which size will fit. This may require removing some cabinets to determine the correct measurement.

When you're building your kitchen cabinets, you'll also need to account for the depth of your countertop. Generally, a deeper countertop is the right choice. While you can buy lower quality products, they tend to be rather expensive.

If you can afford it but don't want to spend much money on a good product, then an inexpensive option is to use stock pieces from an old project. You could also try to salvage parts from older cabinets, and if that's possible, then you should find an item that's relatively inexpensive.

If you're unsure about the type of wood to use, or if you're having trouble finding the correct width and depth, consider adding some hardware. Just be sure that you're able to get the depth you need, and that the hardware won't significantly shorten the length of your kitchen cabinets.

When you're purchasing standard size kitchen cabinets, you may also be able to save a bit of money by using a piece of material that will eventually be used for a storage shelf. While you might be tempted to save money on the cost of this piece, it's best to purchase two pieces of material - one for your storage shelf, and one for the shelf - so that you can easily swap them out.