Making Custom Gray RTA Kitchen Cabinets

You can build kitchen cabinets in your new kitchen by purchasing a kit and cutting to the required depth yourself. You can use the same process for redoing the kitchen and trimming or designing your new room in any color that appeals to you. Here are some tips on how to do it.

While you may have lots of scraps and other debris from your old kitchen cabinets, this can make your job much more difficult. Once you've cleaned out your old kitchen, remove everything that is not nailed down. Look through the cupboards until you find some things that you might be able to reuse.

You can use those items or whatever you can find to expand your kitchen's space without making a mess. Look through the cupboards one at a time, cutting to the required depth for the new cabinets. If there is a lot of tile or something on the wall, you'll need to leave some room. If there are things that need to be moved, remove them from the wall and then set them on the floor.

To do this, you'll need to carefully weigh the situation, such as whether you need to move furniture or not. Then use something to level the floor, such as an old metal countertop or the edge of a paint stool. There will be some pieces of furniture that will need to stay in place while others will be moved.

You can also take some things with you that need to stay put. You'll need a chalk line that will help you mark the wall so you can take it apart. Make sure that you mark a spot where the wall and the new cabinets will meet, and then take the countertop out and make marks on the wall that correspond to the measurements of the new cabinet. This is necessary to keep the two parts of the wall together.

Using a hand saw, cut down the excess thickness from the wall and the cabinet. Cut a hole for each piece that you need to attach to the outside of the wall. Make sure that the screws that secure the things are long enough so they don't rub against each other. It's also a good idea to secure the hardware with grommets that can be screwed into the wall if needed.

Once you've attached the wall to the cabinets, place them together and make sure that they're fairly level. If there is a space in the middle, add a little bit of height. This will help it fit in better and keep it from peaking through the top of the cabinets.

Using the measuring tape again, measure out the exact placement of the knobs and pulls that are on the cabinets. Mark these off on the back of the cabinet with a pencil. Once you've done this, make sure that you cut to the proper depth for each pull. This will also keep them from popping out when they are full of food.

Take the tools that you used to install the cabinets, including the screwdrivers and the tape measure, and place them all together in a drawer. Use a small bench knife and carefully poke holes into each side of the drawer. Once the handles are in, add a handle to each one and insert the drawer. Make sure that the handle is in the right position and that you cut to the depth that you need.

Before you install the handles to the drawers, you will need to put in a support for the cabinet. An easel, which is a frame or hinged tray, is a good way to do this. Place one side of the frame on the wall and add another piece to the cabinet to give it some support. You can install hardware that will hold the frame to the cabinet, such as anchors.

Install the drawer and then replace the drawer, taking care to use the same screws to attach the drawers and the drawer itself. Now, place the drawer in place and attach the drawer to the frame with the screws. long nails.

By using the same process and making sure that the drawer rest where you want them, you can create the look that you want for your kitchen cabinets. and kitchen countertops.