Tips on Choosing the Right Wall Mounted Countertop

Whether you're redesigning your kitchen or replacing an existing counter top, knowing the right way to install a to wall cabinet height can make all the difference. Here are a few simple techniques for hanging cabinets that will ensure a long lasting and trouble free installation.

Use the cabinet height calculator to ensure that the measurements you get are precise. By looking at these numbers, you'll be able to spot any discrepancies or errors before you start. It's also a good idea to set aside a few hours of your time. If you've got it laid out correctly, there's no reason why the job shouldn't go smoothly.

Avoid adjusting things if you can help it. You don't want to add too much height or push too far down to prevent it from going flat. Also, not all to wall cabinets are the same, so take into account what kind of cabinet you have before making your final decision.

If you don't have any idea of the exact dimensions, the calculator is a good way to find out. It will tell you how much extra height you can give a to wall cabinet, and you can then measure the actual dimension of the new cabinet.

Don't assume that the counter depth or width is correct. Although you're going to be using these measurements, they should only be used as guidelines, and if you need to adjust the depth or width of the counter, you should probably use some other method to ensure that the final measurements are accurate.

Always use a wire basket or an anchor to attach the track to the wall. It's easy to just try and hide the wire, but it's much better to have a clean surface to slide the wire on. This is especially true for two wall cabinets that have large nail holes.

The best way to keep it clean is to use lint-free towels. They can be removed for easy cleaning, but you should still be able to see the old finish. Never clean your cabinets with soap and water.

Remember that not all countertops are created equal, and while granite or other stone is often referred to as being stain resistant, this doesn't mean it can be painted without destroying the grain patterns. There are some unique coatings that are difficult to apply, so make sure that you follow the directions completely before trying. Most vinyl products can be painted with little to no damage to the texture.

Even the most expensive products work well enough on cabinets, but some are better than others. Take your time when shopping around. You'll be able to purchase a decent quality product for less than a hundred dollars.

Before purchasing any materials, always make sure that the cabinet height is compatible with your countertop depth. For example, most countertop depths are 2 inches, so if you choose a height that's greater than twice the depth, the chances of the counter sliding out and causing a major dent in the cabinet are high. And remember, even a fraction of an inch difference can cause a lot of wear and tear on the cabinet itself.

When installing a hidden wire shelf, make sure that you're installing it in a place where it can't be seen through. You'll also want to make sure that you're using some type of adhesive on the surface of the shelf to prevent it from moving around or causing a bump on the cabinet.

Any amount of extra countertop height will certainly help with storage space and drawers. And if you can do all of these things, you've just built a wall mounted countertop that's ready to be hung and stored in the space that you have available.