Home Improvement - Proper Base Cabinets Measuring Tips

Choosing the right base cabinets is not as simple as measuring a piece of wood. You have to look at the existing cabinet designs and decide what you want to create with your new project.

Measure your space carefully, so that the shape of the project is precise. You can use the measurement table in Home Depot or Lowe's, which will let you draw a floor plan before you measure. If you do not have a flat surface to measure on, you can find good marquetry plans online or at a craft shop, but you may want to measure your wall and the rest of the room first.

Make sure that you measure the walls so that you know how much you will need to purchase to properly install new wall cabinets. Be sure to measure the width and height to be sure you have a piece of wood the proper size. A common mistake that most DIY'ers make is thinking that the length of the cabinet and the width is the same.

Consider the measurements of your chosen design. Are you creating your own design or will you be replacing an existing one? There are a number of options you can choose from, such as sliding, pull out, raised panel, and others.

If you are creating your own design, you can measure the existing cabinets and choose a piece that is less than the dimensions of the holes in the existing hardware. Instead of purchasing your own new hardware, you can purchase inexpensive discount hardware from a local cabinet shop or Lowe's. In many cases, they will only require you to drill one or two holes, depending on the style of the cabinet. If you are replacing an existing piece, be sure to take the measurements of the previous piece of furniture before purchasing a new one.

If you are ordering hardware from Lowes Home Depot or Lowe's, make sure to measure both pieces before you order. You should also know how much the hardware will cost, since hardware will add up. Also, you may need to measure the outside of the hole before you purchase the hardware.

In most cases, you will want to purchase hardware in a package. The store will offer different sizes of hardware and you will have the option to choose. You may also have the option to choose a style that is already matched to the existing wood.

You will also need to measure the height of the cabinet hardware. For many consumers, the height of the hardware is not a major concern. However, for those homeowners who want to change the height of the cabinets, they need to take the measurements before purchasing the hardware.

Hardware generally comes in three standard heights. In many cases, the height of the cabinet hinges is the lowest and the hinges are the next highest; but some homeowners prefer the hinges to the cabinet doors.

Depending on the style of the door, you may need to purchase hinges that are adjustable. By purchasing hinges that are adjustable, you can move them up or down to your desired height. Some hardware can also be custom made, which will give you a wider range of choice.

In addition to choosing cabinet hardware, you will also need to measure the base cabinets. These will be installed along with the top hardware and you can't change the base cabinets until the top hardware is installed. When measuring the base cabinets, you need to take into account how much wall clearance you have available, which will vary depending on the style of the furniture.

Base cabinets are important to your project. Therefore, it is very important to measure accurately before making any final purchases. Then, if you have the opportunity, you should measure the pieces of furniture you have before you purchase them.